Quality Preheat, a division of Hudson Services, offers several different models of pressure washers.

These units provide the ability to complete many different projects depending on the scope of work and location.

Pressure Washers

QP3000HXP (Electric Hot Water)

  • 4.5 GPM @ 3000psi 
  • 480 Volt, 3 Phase, 90 amps
  • Class 1, Division 1, (Groups D, E, F, G) 
  • Explosion Proof                                                            
  • 10 HP Electric Motor
  • Single Point Lift Eye, Fork Guides 
  • 1200 lbs. – 60” x 44” x 48”
  • Built-In Soap Tank and Downstream Injector 
  • Dual Filtration System
  • Water Temperatures of 175° 

Included with Unit

  • 100’ Power Cable
  • 100’ of ⅜’’ Double Braided Hose
  • (2) Armored Dual Soap Wand
  • Parts Kit Including Extra Filters,
  • Tips, and Misc. Replacement Parts

Safety Features

  • Pressure Relief Valves Located on Heaters and Pump
  • In-Line Flow Switch
  • “Posi” Lock Safety Gun

QP3000CXP (Electric Cold Water)

  • 4.5 GPM @ 3000psi
  • 240V or 480V, 3 Phase, 90 amps
  • Class 1, Division 1, (Groups C, D, E, F,)
  • Explosion Proof
  • Dual Point Lift Eyes
  • 500 lbs. – 3’3” x 3’3” x 3’3”
  • Built-In Soap Tank and Downstream Injector
  • Dual Filtration System

Included with Unit

  • 100’ Power Cable
  • 100’ of ⅜’’ Double Braided Hose
  • (2) Armored Dual Soap Wand
  • Parts Kit Including Extra Filters,
  • Tips, and Misc. Replacement Parts

Safety Features

  • Pressure Relief Valve on Pump

QP3000HWD (Hot Water Diesel)

  • 4.5 GPM @ 3000psi
  • Direct Drive Cat Pump
  • Kohler 10 HP Diesel Engine
  • Adjustable Hot Water Heater
  • Downstream Injector with Siphon Hose and Screen
  • 2-Point & 4-Point Lift
  • 1000 – 1200 lbs. – 57’’ x 37’’ x 46’’
  • Skid Mounted

Safety Features

  • Pressure Relief Valve on Pump
  • (ESD) Emergency Stop Device
  • In-Line Flow Switch

Included with Unit

  • 100’ of ⅜” Double Braided Hose
  • (2) Armored Dual Soap Wands
  • Replacement Parts Kit

Screen Cleaners

Screen Cleaners are a great solution for low pressure cleaning. Ideal for shale shakers as well as Lubricant/Sealant applications. Quality offers electric and pneumatic powered screen cleaners to suit different needs. 

Pneumatic Screen Cleaner

  • Direct Drive Cat Pump
  • 15 to 500 PSI Output
  • Maximum 60 PSI Intake
  • 57 Gallon Capacity Tank with Level Indicator
  • Air Filtration, Pressure Control, and Oil Lubricating System
  • Four-Point Lift Eyes, Fork Guides
  • Fully Skid Mounted Aluminum Frame w/ Catch Basin to Prevent Leaks
  • 500 lbs. Empty, 1000 lbs. Full
  • 3’6” x 3’6” x 3’6”

Electric Screen Cleaner

  • Direct Drive Cat Pump
  • 15 to 500 PSI Output
  • Maximum 60 PSI Intake
  • 480 Volt or 240 Volt, 3 Phase
  • Explosion Proof
  • Class 1, Division 1, (Groups C, D, E, F, G)
  • 57 Gallon Capacity Tank with Level Indicator
  • Four-Point Lift Eyes, Fork Guides
  • Fully Skid Mounted Aluminum Frame with built in catch basin
  • 500 lbs. Dry, 1000 lbs. Full
  • 3’6” x 3’6” x 3’6”

Included with Pneumatic and Electric Units 

  • Single Barrel Gun and Lace 
  • 100’ of 3/8” Double Braided Hose 

Pipe Cleaning Wand

Quality has designed a proprietary cleaning wand used to remove mud from the drill pipe as it is pulled from the hole. Furthermore, this wand excels in applying rust preventative coatings to your pipe. We offer three nozzle iterations (3, 4, and 5 Tips) and can clean up to 8’’ pipe. When combined with our pipe cleaning stand, this device can be operated efficiently by one technician. For best results, pair with a 3,000 PSI pressure washer for cleaning. Combine with one of our Screen Cleaners for applying any necessary protective coatings.

Pipe Cleaning Stand 

Used in conjunction with the cleaning wand, the stand allows cleaning to take place with only one operator. 

  • Single Point Lift Eye 
  • 2’ x 2’ Base 
  • 90” Tall 
  • 150 Lbs. 

Mud Cleaning and Pumping Equipment

MS-V Air Operated Mud Bucket

Quality’s air operated mud bucket is a new and patented design that prevents mud spillage while tripping pipe. The 4” and 6” discharge pipes allow for faster mud flow, thus increasing the speed at which you can trip pipe. Our mud buckets address safety issues on the job by eliminating slip hazards from mud falling onto the deck and its enclosed cage design reduces pinch points while operating the equipment.

  • Compatible with 2 ⅜” – 6” Pipe
  • Simple Operation
  • 4” or 6” Discharge Pipe
  • Quick Change Seals
  • Heavy Duty Construction
  • 2-Point Lifting Eyes, Hand Holds
  • 26” x 25” x72”
  • 900 Lbs.

Included with unit

  • 100’ Air Hose
  • (2) 4” or 6” x 25’ Discharge Hoses
  • Seal Remover

Air Diaphragm Pumps

Ingersoll Rand / ARO Diaphragm Pumps provide stall-free, ice-free operation. Their patented “Unstallable” unbalanced air valve design avoids stalling issues associated with other pumps. The “Quick-Dump” exhaust valves divert cold exhaust air from ice-prone components, preventing freezing. It is the most reliable pump on the market today. Available in 2” and 3”.

Features 

  • 3” Model ○ 2’ x 16” x 32” , 100lbs 
  • 2” Model ○ 19” x 1’ x 27” , 50lbs 

Includes 

  • (2) 3”x 25’ Suction / Discharge hoses 

Cooling Fans & Bug Blowers

Bug Blowers

Bug Blowers provide a steady stream of air which cools down the workspace, deters insects from interfering with personnel while working, and helps ventilate exhaust fumes. Quality offers bug blowers in 24” and 48”. Misters can be added to any our bug blowers.

24’’ Bug Blower

  • 5,000 CFM
  • Explosion Proof
  • 240V or 480V, 3 Phase
  • Class 1, Division 1, Groups D, E, F, G
  • Extra Heavy-Duty Steel Frame
  • UL Certified ‘XP’ 2HP Motor and Starter
  • 24” Cast Aluminum Impeller
  • Single Lift Eye, Fork Guides, Hand Holds
  • Weight – 400 Lbs.
  • 100’ Power Cable
  • 68” H x 43” W x 15” D (Floor)
  • 35” H x 43” W x 15” D (Railing)

48’’ Bug Blower

  • 40,000 CFM/ 1200 rpm
  • Explosion Proof
  • 480 Volt or 240 Volt, 3 Phase
  • Class 1, Division 1, D, E, F, G
  • Extra Heavy-Duty Steel Frame
  • UL Certified ‘XP’ 5HP Motor
  • 48” Cast Aluminum Impeller
  • Single Lift Eye, Fork Guides
  • Weight – 500 Lbs.
  • 100’ Power Cable
  • 76” H x 62” W x 33” D

Cooling Fans

Cool your workspace by up to 30 degrees with a Quality Evaporator fan. The rolling skid mounted fans are easy to move and can be done by one person. Skid includes water reservoir which ice can also be added to.

36’’ Evaporator Cooling Fan

  • 9,600 CFM Air Flow
  • 32 Gallon Water Reservoir
  • Water Connection Requiring Less Than 50 PSI
  • Explosion Proof
  • 110 Volt, Single Phase for Easy Hookup
  • Class 1, Division 1, Groups C, D, G
  • Uses a Single Speed, Waterproof, Air Cooled Fan Motor
  • Aluminum Mounted Skid with Heavy Duty Wheels
  • Single Lift Eye, Fork Guides
  • 100’ Power Cable
  • Weight – 350 Lbs.
  • 70” x 32” x 70”

Cooling Trailers

Quality Preheat offers cooling trailers to provide a covered break area, with a 36’’ evaporating cooling fan. These portable cooling stations offer an escape from the heat reducing the risk of fallout from heat exhaustion.